pE - The "perfect" Editor(tm) Copyright (c) 1990-1993 by Just Excellent Software, Inc. These notes are addendum to the printed pE manual. Release 4.01 - Aug 12, 1993 ------------ 旼컴컴컴컴컴컴컴컴컴컴컴커 쿐nhanced Search Features� 읕컴컴컴컴컴컴컴컴컴컴컴켸 pE has a brand new Search and Replace dialog! �袴[ ]袴袴袴袴袴袴袴袴袴袴袴袴� 튥earch For 붜� 붜栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢舫栢 봬컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캤栢 튣eplace With 붜� 붜栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢舫栢 봬컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캤栢 � [ ] Backward [ ] Case Sensitive 붜� � [ ] Find All [ ] Pattern (Reg Exp) 붜� � [ ] All Windows [ ] Load all Matches 붜� � [ ] Search SubDirs Mask:*.* 붜� 봬컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴캤栢 � < OK > < Cancel > 붜� � 붜� 훤袴袴袴袴 Ctrl+Enter to Start Search 袴袴袴袴暠栢 栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢栢 If you press Alt-F(ind) or Alt-R(eplace) or Shift F5 (Found List, the above dialog box appears. If no search string is defined, pressing FindForward (F5) or FindBackward (F6) will call up the dialog box, as well. - if you're doing a search, type in what to look for in the area underneath the "Search For". - then check any buttons you want by using the space bar, the letter x, the highlited letter, or the mouse to set a backward search (Backward), search for all occurrences in one file (Find All), in All Windows (All Windows), Make the search Case Sensitive (must match upper and lower case exactly), and the search string is a Regular Expression (Pattern). You will need to review regular expressions in the peuser.txt file if you are not familiar with search patterns. - you move around the dialog box by using the arrow keys, the tab, or the enter. Pressing the first letter of any button will also move you to that button and check it on or off depending on what it was. Of course the mouse as can be used to navigate as well. - pressing ESC (escape) cancels any entry and returns to the editing screen. Clicking the Cancel button with the mouse or pressing Enter when the Cancel Button highlited will have the same effect. - Pressing the OK button with the mouse, or Enter when OK is highlighted will begin the search or replace. - The title of the dialog box will indicate whether or not you are beginning a search or replace. - If you pressed Shift F5 (Found List), the dialog box automatically comes up with [x] Find All checked, otherwise its the same as a Find. Setting 'Find All' on means you want a list of ALL occurrences of the search string, either in the current window, all windows of even all files in this directory, or all files in this directory and all subdirectories; see 'Calling Find from Chooser', below. - If you press Alt-R(eplace), instead of 'Find All', the second button look like [ ] Replace All checking this button will replace all occurrences of string 1 with string 2. Further if [x] All Windows is checked, all occurrences EVERYWHERE will be changed. Please use caution! Enter a value in the 'Replace With' area. Please note that a NULL (empty) 'Replace With' is a VALID replacement. You may be trying to delete part of every string. If you leave the 'Replace With' area empty, pE will ask for a confirmation of your intent. - NOTE: If you mark an area, do a replace all and don't like the result, alt-0 (zero) undoes the replace. This will only work in a single window and only as long as you have memory. - You begin the Search or Replace with Ctrl+Enter anytime after you have entered the necessary information. - NOTE: Any macros which did a DefineFind in previous versions of pE, need to be rewritten to accommodate the Ctrl-Enter exit rather than just Enter. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 쿎alling Find from the Chooser� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴� pE will search through files finding any text you are looking for. The files can be any of the recognized formats, ie � WordPerfect � Word for Windows � Word for DOS � AmiPro � Windows Write or just plain ASCII Text. pE ignores most files whose formats are not one of the above. From the File Chooser (Alt-O(pen), Alt-V(iew), Alt-E(dit), simply press F5 (or whatever key you have assigned to DefineFind (Alt-F is default). From the Chooser, the buttons have a slightly different meaning: - Find All means build a list of EVERY occurrence of the search string, so the entire file is scanned. If Find All is left off, then only the FIRST occurrence is noted. As you would expect, this is a faster search. - Load all Matches only has effect from the file chooser. If set, any files meeting the search criteria will be automatically loaded into pE in separate windows. - Load all Matches and Find All are mutually exclusive. If you set one, the other will be unset. - All windows has no effect from the file chooser. - Backward has no effect from the file chooser. - Search SubDirs, if set will search not only in the current directory, but in all subdirectories of the current directory. If at the root directory, IT WILL SEARCH THE ENTIRE DRIVE. - Mask: allows you to search a category of files, like *.txt, or *.doc, or *.wp, or even pe*.* (all files beginning with the letters pe. It is much faster to specify a narrowing mask; if you leave it *.*, pE will look at all files EXCEPT for files that have extensions which are obviously binary. (.exe,.obj,.dll,...). The default setting is whatever you came into the chooser with. - [x] Find All builds a found list by writing to a file named FND.$$$. When the search finishes, FND.$$$ is read into a pE window and DELETED (if completely read). Files starting with the character '~' and having extensions of '.$$$' are deleted when read by pE. This means that you must do a save to a different name if you wish to keep these files. The directory used for FND.PED is the one pointed to by the setting of the TMP environment variable. If TMP doesn't point anywhere, the current directory is used. This is important to know only because if FND.$$$ is NOT completely read in, it is NOT deleted and you may want to delete it if TMP is on permanent media. - A search may be interrupted at any time by pressing ESC (escape). 旼컴컴컴컴컴컴컴컴컴컴컴� 쿘ark words with a mouse� 읕컴컴컴컴컴컴컴컴컴컴컴� If you hold the Alt key down while you click (left button) on a word, the word will be highlighted (marked). Pressing F5 will 'capture' this text and automatically begin a search. Even if not found, this is a good way to get complicated text into the 'Search For' part of the dialog window. 旼컴컴컴컴컴컴컴컴� 쿣iew Only Windows� 읕컴컴컴컴컴컴컴컴� View only windows are no longer a special color. Instead the 'File Modified' symbol on the status line is a '�' instead of an '*'. 旼컴컴컴컴컴컴컴� 쿟ext conversion� 읕컴컴컴컴컴컴컴� pE has been enhanced to read all the major Word Processing formats. This release include the ability to read and convert to 'straight' ASCII, the following formats: WordPerfect 5.1, 5.2 for DOS & Windows MicroSoft Word for Windows 1.0 & 2.0 MicroSoft Word for DOS 5.0 & 5.5 AMI Pro for Windows 2.0 & 3.0 MicroSoft Windows 3.1 Write No special action is required of the user. pE simply determines what format is required and converts appropriately. Most formatting, including table layouts, is lost. What remains is the ASCII text present in the document. Tabs are detabbed using an interval of 5 spaces for word processing files, and whatever the detab setting for ASCII documents. (usually 8). Long Lines (longer than the right margin setting of Paragraph Format) are wrapped to column 1 on input if WrapLines (see below) is on. 旼컴컴컴컴� 쿥rapLines� 읕컴컴컴컴� Command line switch /l or L has been added. L for long lines. pE will wrap long lines at the right margin setting of Paragraph Format (see Option menu). This is very handy when converting from Word Processors which write out paragraphs as a single line. If you read in a file which has these long (sometimes thousands of bytes) lines, simply call up the option set menu (Alt-tab) and turn on WrapLines. You may alternatively press Ctrl-(grey)+. All of the options in the option settings menu are now saved and restored from env.ped when saved. Release 3.05 - July 4, 1993 ------------ A number of relatively minor anomalies have been corrected. - Page Down now works correctly after a file is minimized, then maximized. - Any number of files (but less than 40) may be opened from the command line, separated by commas, up to the dos command line length limit. - pE now correctly opens files without extensions from the command line. - default path is provided along with default name of "NO_NAME" when a new window is opened. - If the first character typed in response to a prompt on the status line is a 'del' key, the status line is cleared - Shift + numeric pad arrow keys no longer mark text unless the Num Lock key is activated. With the number of 101 key keyboards, it is felt that the 'grey' arrow keys shifted is sufficient. This allows the numeric key pad to be used to enter numbers by holding the shift key down (which was the intended use). Note that shift and any of the 'grey' arrow keys will mark text. Also ^K_K will begin and end a stream block. 旼컴컴컴컴컴컴컴� 쿥ordstar Switch� 읕컴컴컴컴컴컴컴� Added /w as a command line switch. When invoked, /w strips the high bit (sets to 0) so that graphic characters used by WordStar are reset to normal characters. There is no corresponding toggle within pE. 旼컴컴컴컴컴커 쿚ptions Menu� 읕컴컴컴컴컴켸 Added an options menu. You can get to it from the Options pull down menu or by pressing the assigned key. Key.txt (and .ped) have been modified to assign Alt-tab to this function. Once the menu is presented, position to the desired option and press ENTER. A check mark appears (or disappears) to the left of the option indicating ON/OFF status. When you have finished setting options, press ESC. 旼컴컴컴컴컴컴커 쿣isible Spaces� 읕컴컴컴컴컴컴켸 ^Ins will toggle visible spaces on/off. When on, space characters are replaced with the current 'visible' space character (default value is decimal 250 [�]. The default can be changed with the command line switch 'e'. /e:n n = decimal value of character to be used when displaying blanks [default is 250 '�']. If you would like to just make spaces visible but not change the default value then use /e: Please note the colon is necessary in order to read subsequent command line options (like the filename or filespec 旼컴컴컴컴컴커 쿗eave Blanks� 읕컴컴컴컴컴켸 Alt-Ins (the grey Ins, not the 0 on numpad) will toggle leave blanks on. Normal behavior for pE is to trim blanks from the end of lines. This means you cannot create a file having blanks after non-blank characters. Which of course, also means you cannot create a file having blank lines (lines consisting of only blanks. Now comes the 'Anders' option, named after the first requester. Command line switch 'a' (for anders) will leave trailing blanks alone. As usual, any command line option may be set 'permanently' by including the PED environment variable: In AUTOEXEC.BAT SET PED=C:\PE /a /.... This would mean 'do not trim spaces' each time pE is invoked. Of course, one can also create batch files with different combinations of switches for different purposes. Release 3.04 - May 18, 1993 ------------ 旼컴컴컴컴컴컴� 쿚pening Files� 읕컴컴컴컴컴컴� pE will edit a file (put an existing file into a new window) through the simple means of you typing the file name (full filespec if needed) on a line by itself and pressing Alt-I (include). 旼컴컴컴컴컴컴컴컴커 쿘ultiple file open� 읕컴컴컴컴컴컴컴컴켸 pE will accept a list of files to open on the command line formatted as follows: pe file1.ext,file2,ext,file3.ext If this form of command line is used, then any line number entered after the filename is ignored. Any files in the list that cannot be opened are bypassed and ignored without message. Files are opened with windows minimized, except for the last file, which is opened in a full window. If you want to open a group of files consistently, it is much easier (at least less to type) to enter the filenames into a file named list.ped and to open using the @; see below @ command. 旼컴컴컴컴컴컴커 쿜uickExit&Save� 읕컴컴컴컴컴컴켸 QuickExit&Save (Alt-Q) will write each modified file back to the same name and exit. It no longer prompts for files other than the current. IF YOU DO NOT INTEND TO SAVE ALL CHANGED FILES use Alt-X (Exit). Exit will prompt for each file changed before exiting. 旼컴컴컴컴커 쿌llWindows� 읕컴컴컴컴켸 AllWindows is a toggle which determines the boundary of find and search/replace. When on, any find will continue to look for the "find" string in other windows. Windows are searched in number sequence. If the search direction is forward, then the next higher window number is jumped to and searched starting with the first line and proceeding to the end of the file. If the search direction is backwards, then the next lower window number is jumped to and searched beginning with the last line moving towards the top of the file. When all windows have been searched, the search stops. Replace will replace across all windows at once. BE CAREFUL. This is real power!!! Make sure of what you're changing before you change everywhere. One way to do that is to use pE's FoundList command; see below. You may now open 40 files at one time, memory allowing. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 쿥ith pEp this is almost never a problem. (see "order.frm")� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 Hint. Keeping a file minimized saves 8K of memory per window. 旼컴컴컴컴� 쿑oundList� 읕컴컴컴컴� pE will now create a "found list" and put it into a new window named "FIND.PED". The format of the found list is the filename in which pE found the string, the line number and the string. By positioning your cursor on any of the found items, pE will jump to the window and line number of the find string. It is very fast and will work in a single window or against all window depending on the setting of AllWindows; see above. There must be at least one available (unopened) window for foundlist to work. Foundlist differs from find in that it always searches beginning with the first line and proceeding to the last in each file, regardless of the cursor location. In addition it references only the first occurrence of a string on the line, rather that repeating the same line over for successive occurrences. 旼컴컴컴� 쿖ey.txt� 읕컴컴컴� Key.txt has received a work over. Many comments have been added along with a few key changes. As usual, the latest key definitions are found dynamically assigned in the command window (F1) and in the help text of each pull down menu. 旼컴컴컴컴컴컴커 쿟he @ command.�(on the command line) 읕컴컴컴컴컴컴켸 pE will now open all files in a file list. 1. Create a file with the files you wish to open you can simply type the names into pE and save the file as list.ped. (what you call it is optional) you may use the DOS dir command with the > symbol to create the file list, i.e. dir *.c /b >list.ped would cause a list of all the files having an extension of 'c' to be listed into list.ped. Please note the /b, it is necessary to cause DOS to not leave spaces between the file name and extension. If you use 4DOS, you don't need the /b. 2. execute pe by typing pe @[name] by default, when pe sees the @ alone, it will open list.ped and proceed to open each file therein in a different window, until it runs low on memory (when there is 12K left) or it runs out of windows (40). If you wish to use a different file list, simply type the name after the @, i.e., pe @proj All files, except the last, will be opened as minimized windows. 旼컴컴컴커 쿕umpPrev� 읕컴컴컴켸 You can now cycle forward or backward through the window chain. Pressing JumpPrev (F2) will jump to the window numbered one less than the current window. When a window is closed, the window numbered one less is made the active window. 旼컴컴컴커 쿕umpZoom� 읕컴컴컴켸 Pressing F12 (shift F12) will tell you JumpZoom is ON. Pressing again will tell you its OFF. When JumpZoom is ON and you push the JumpNext (or Prev) key, the current window is minimized, the jump occurs and the new window is maximized. In other words if all of your windows are minimized and you want to go from one to another, this is a way in which you can minimize the use of memory and still have up to 40 files open at once. When JumpZoom is OFF, JUMP will simply take you to the next window, and not affect its size. 旼컴컴컴컴컴컴컴컴� 쿘inimize/Maximize� 읕컴컴컴컴컴컴컴컴� The right mouse button double clicked on the top border of a window will either minimize or maximize the window depending on in current state. Just double click anywhere left of the right edge - 1. You may also click once with the left button and follow that with a click of the right button. Just don't move the mouse in between clicks. The control menu is gone. It was superfluous, unneeded and a pain. Pressing Alt Space bar produces a space. If you click on the 'control' gadget, the window will close. All of the functions available under the control menu are available through key strokes, mouse clicks or the command window. If anyone out there really cares, let me know. When running under WINDOWS, you can now reach WINDOWS control menu with Alt Space bar. 旼컴컴컴컴컴컴커 쿢nDo Paragraph� 읕컴컴컴컴컴컴켸 If you align paragraph (Alt-a) and don't like the result, press ^F10. The lines involved will be restored as they were before you aligned the paragraph. We're still working on a general UnDo. Release 3.03 - April 7, 1993 ------------ By popular demand, I removed the timer on the alt key. It was confusing/annoying and unpopular. Its gone. Go to the menu with Alt+Shift or Shift F1. /m is gone also. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴� 쿌lign Paragraph and Drawbox� 읕컴컴컴컴컴컴컴컴컴컴컴컴컴� When Alt + Shift was implemented to activate the menu, pE was no longer able to confirm paragraph alignment with Alt + Shift A. Similarly, drawbox could no longer redefine box styles 6 - 9 with Alt + Shift + (6,..9). This has been remedied in this release through the use of the Ctrl key. To temporarily change paragraph formats, use Alt + Ctrl + A. To change the definition of box styles 6 through 9, use Alt + Ctrl + 6 thru 9. 旼컴컴컴커 쿎alendar� 읕컴컴컴켸 Alt-F2 brings up a calendar. (Calendar is also in the edit menu). Page Down advances a year at a time, Page Up goes back a year. The arrow keys advance/retract a month at a time. Left, Up go back, Right, Down go forward. The calendar window cannot be sized, maxed or minimized, but can be moved wherever its convenient. The calendar is accurate for dates between 100 ad and 14000 ad. Control Page Up will restore the date to the current date (system date). Pressing Alt-L(linemark) while in the calendar, followed by Control-End(pagebottom) will mark the lines in the calendar. Pressing the grey* will then copy the current month to the scrap. Now you can paste that month into any window. Note that when you start marking again in the calendar the first line marked will now be the bottom line so that you will have to press Control-Home (pagetop) to mark from the bottom to the top of the calendar. Using this method you can construct a calendar for any year, from any month to any month. Release 3.02 - February 9, 1993 ------------ 旼컴컴컴커 쿘enu Key� 읕컴컴컴켸 Alt + Shift will access the menu immediately. Shift + F1 will also access the menu immediately. The menu can also be gotten to by pressing ALT and holding for approximately 1 second. Once the menu comes up you can press the first key of the options F, E, S, W, O or H. You can adjust the amount of time you must hold the alt key down with the command line option /m:d where d is the delaytime in seconds. (whole numbers only). A delay time of 0 causes the menu to come up instantly, but prevents you from using the Alt key commands. Please note that the environment variable PED can be set so that pE will always use whatever command line variables are set therein. For example SET PED=C:\PE /m:2 placed in autoexec.bat tells pe that its home directory is c:\pe and that it is to use a menu delay time of 2 seconds (default is 1). See the docs for other command line choices. Setting a large delay time (like 10 seconds) effectively turns off this capability. 旼컴컴컴컴컴커 쿎ontrol Menu� *** killed later  *** 읕컴컴컴컴컴켸 pE now has a control menu like WINDOWS. Pressing Alt + Spacebar (or clicking what used to be the close gadget), will pull the control menu down. Control menus belong to windows, so each window has one. The menu choices in the control menu are: � Move - will move the current window (but only if there's somewhere to move it. � Size - sizes the current window. � Minimize - reduces window to minimum size � Maximize - makes window as large as possible � Close - closes the window. � Switch to - the same as the Jump List command. (switches to another window). 旼컴컴컴컴컴컴컴컴컴� 쿘inimize & Maximize� 읕컴컴컴컴컴컴컴컴컴� Two new commands, minimize and maximize were added to make it very easy to control window size. The advantage to minimizing a window is that the a significant amount of memory is made available. Zoom will toggle the state of a window size when it is small or large. Sizing a window to its maximum size set's 'both' sizes of a window to max. 旼컴컴컴컴컴컴커 쿞tack(Windows)�- new option under Window menu. 읕컴컴컴컴컴컴켸 StackWindows will stack all windows to their minimum (or maximum) sizes. It is a toggle. It is assigned to the F12 key. Those of you who have the old style keyboards will have to assign it to some other key. 旼컴컴컴컴컴� 쿌SCII chart� 읕컴컴컴컴컴� The ASCII chart was completely redone to be more useful and easier to read. Calling up the chart will pop up a window with a line devoted to each of 255 (out of 256) ASCII characters. (0 - nul, is not present). The highlight is placed on the last character it was on when you first called the ASCII chart up. (The first time its starts at 1, the control character A (). By using the arrow and page keys, you can position to any character you wish. Of course, you can also position with the mouse. Once you have selected the character you wish to use, pressing ENTER causes that character to be entered into the last window at the row and col the cursor was on. Pressing ENTER again will enter the character again. ESCaping from the ASCII window will close it. So will the normal window close (alt-k) command. When the ASCII window is closed (by any means), the character under the highlight is assigned to LASTASCII, which I have defined to be the (`) backward apostrophe (tilde?). Anyway, subsequent to the ASCII chart making this assignment, each press of the ` key will get you whatever ASCII character was assigned. If you regularly have use for that key, then I suggest you assign the command LastAscii to some other key. The ASCII window will insert a character into the window defined just before it, only when it is "active". It is active when the border is double and the title ASCII is the same color as the background of the window. If a column block is defined (and visible) in the window before the ASCII chart is selected, the character selected from the ASCII chart is used to fill the block. You are prompted for permission to fill the block first. If you select FillBlock (^K-F), the ASCII chart pops up to provide you with the entire range of ASCII characters to choose from. The window the ASCII chart is in does not participate in stacking (up or down) or cascading, but can be individually minimized, maximized or sized. There isn't much point in making it wider, although making it higher will allow you to see more characters at once. Note that the F2 key will leave the ASCII chart open and advance to the 'next' window. If only two windows are open, the F2 key will shift the focus from one to the other. 旼컴컴컴컴컴커 쿩oom Gadgets� 읕컴컴컴컴컴켸 The zoom gadget has been reworked to only appear if there are two defined sizes of a window. The zoom character is an arrow pointing either up or down. If it points up, when clicked the window will get bigger. If it points down, when clicked, the window will get smaller. Release 3.01 - January 11, 1993 ------------ �袴袴袴袴袴袴袴� 튍nnouncing pEp� 훤袴袴袴袴袴袴暠 I am pleased to announce the availability of pE - Professional. pEp is the protected mode version of pE. This means that it can use all the memory in your computer. It also means that under Windows 3.1 (in enhanced mode) it will virtualize memory to 16MB (presuming you have sufficient disk). Registering pE allows you to purchase pEp at a discounted price. pEp will not be available through normal shareware channels, but only to registered pE users! You must have a 80286 (or better) with > 1 meg of memory to run pEp. You may evaluate a copy of pEp by filling in the registration form and mailing it in with a check or money order for $5 (+shipping). Registering pE will allow you to request a demo copy of pEp for no additional charge. Previous pE registrants may upgrade their versions of pE to the current version and purchase pEp for an upgrade price of $29 (+shipping). 旼컴컴컴컴컴컴컴컴컴� 쿟ab Key in Hex mode� 읕컴컴컴컴컴컴컴컴컴� The Tab key now toggles back between the ASCII portion and HEX portion of a HEX display. Back Tab will go from ASCII to HEX as well. The cursor is a block in HEX mode. 旼컴컴컴컴컴커 쿟oggleDecHex� 읕컴컴컴컴컴켸 New command, ToggleDecHex, allows the offsets along the first column of the hex display to go from hexadecimal to decimal. While in decimal mode, you can jump to any decimal offset within the file. Who likes doing hexadecimal arithmetic, anyway? I've assigned Shift F9 as the key. 旼컴컴컴컴커 쿞croll Bar� 읕컴컴컴컴켸 The scroll bar has been changed to work like everyone else's. (almost). I couldn't resist putting some gadgets in the status line which work like my old scroll bar did. The double arrow means that if you click with the left button the window scrolls one way, with the right button it scrolls the other way. The beauty of these gadgets are that if you get rid of the borders, you still have a way to scroll and zoom with the mouse. While the top scroll gadget (and now bottom) work with the left mouse button the way you would expect, the opposite action will occur if you click with the opposite mouse button. If you press the left button on the top gadget, the file scroll up (the arrow point up), if you press the left button on the bottom gadget the file scrolls down. The right button depressed on either of these gadgets reverses the action of the left button. Clicking left anywhere above the "thumb" will cause a page up, below the thumb a page down. If you hold the mouse button down, you will continue to page the file in the direction started until you release the button. It's much easier to use than to explain. 旼컴컴컴컴컴커 쿟ime Display� 읕컴컴컴컴컴켸 The time now displays in the right hand corner of the menu bar. It is visible any time the menubar is visible. If you pay attention to it, you will notice that the colon flashes once a second. 旼컴컴컴컴컴컴커 쿎ount of Files� 읕컴컴컴컴컴컴켸 The number of files and directories in the current chooser window is displayed in the lower right portion of the chooser border. History prior to this point may be requested from Author.